Sure, please click here for more details about our Purchse Order Process.

Please click the link below for a copy of .xTool's W-9

P2S is a cutting powerhouse with a large working area, and F1 Ultra is better suited for small-size deep metal engraving. Both are similarly priced. Think about your use case, working area, and speed.

 P2S (CO2 laser) excels in cutting and can handle all color acrylic.; F1 Ultra (fiber laser) handles metals well. P2S offers 600mm x 305mm working area at 600mm/s, while F1 Ultra provides 220mm x 220mm at 10000mm/s.

Efficiency: CO2 laser cutters have ultra-high absorption efficiency. xTool P2S can cut 3mm basswood at the speed of 35mm/s , which is 6 times faster than a 20W diode laser and 3 times faster than a 40W diode laser. Materials

Versatility: CO2 laser cutter can cut all colors of acrylic, including clear acrylic, and directly engrave on glass, offering unmatched versatility for your creative projects.

Some of the materials xTool P2S can cut include:

Wood: pine, oak, maple, birch, walnut, cherry, plywood and basswood.

Acrylic: all colors and all types, including translucent, mirrored, opaque and clear acrylic.

Fabric: cotton, polyester, nylon, silk, linen, polyester and polyamide fabric.

Leather: genuine, synthetic, faux leather.

Others: EVA foam, felt pad, plastic, rubber, paper, cork and cardboard.

But, xTool P2S cannot cut metal or glass, but it can engrave on it.

Metal: coated metal, anodized aluminum alloy, and anodized titanium steel. For stainless steel, you need to spray a coating on it before marking.

Glass: float glass, insulated glass, frosted glass, tinted glass…etc.
Please note that glass that is too hard or too thin may lead to break.

If it can be cut, it can generally be engraved.

You can cut solid wood of thickness up to 18 mm, such as black walnut and cherry wood. When cutting plywood, you are advised not to cut a piece thicker than 12 mm. The cutting of thick plywood may cause a fire.

You can use LightBurn to create your design and operate xTool P2S to cut materials. Currently, the camera and auto-focus functions are not supported by LightBurn. You need to perform framing to preview the processing area and manually input the material thickness.

When working with xTool P2S (baseplate in place), the rotary attachment supports cylinders with a diameter of 3 to 42mm; and when working with xTool P2S and its riser base, the rotary attachment supports cylinders with a diameter of 0 to 180mm.

Largest circle diameter: 305mm Smallest circle diameter: 0.01mm

xTool P2S is incredibly easy to use and highly smart. Most of our users said that they can complete their first setup (unboxing, plugging in, and setting up) in just around 20 minutes. This is due to various smart features such as camera positioning and autofocus ranging system.

 We provide plenty of resources for assistance: a detailed manual to help you quickly and easily learn how to use it, our community can typically answer most questions within hours, and the Support Centre provides detailed learning materials covering the most common questions. If you have any questions, we are always here to assist you.

Yes, you can use the P2S without WiFi. Whether using XCS software or LightBurn, simply connect the machine to your computer via Type-C cable to operate without WiFi.

Theoretically, screen printing can be done on all materials except air and water. However, based on our precision requirements and our ink characteristics, we recommend paper, fabric, silk, wood, acrylic, metal, glass, and ceramics. These materials have been thoroughly tested, but you can also try other materials and find the best settings. Shop materials here.

Yes, the coated screen is reusable. Each screen is capable of supporting at least a hundred prints. You can reuse the design, but it requires an extra step. To do this, you need to remove the existing emulsion using an emulsion remover and then reapply a new emulsion. This step may fail and you will need to explore adjusting the laser parameters again. In theory, this process allows for endless reuse, but in practice, the mesh will eventually degrade, and you will need to replace it. To simplify this process and avoid extra work, consider buying pre-coated screens from xTool, which offers great prices.