Dual laser engraver for fast, on-the-go personalization
2 in 1: 10W blue laser + 2W 1064nm infrared laser
Up to 4000 mm/s engraving speed
HD Photo Resolution with 0.0019mm Movement Accuracy
Handheld & portable
Pre-assembled and auto focus
Diode Laser +
1064nm Infrared Laser
10W: Diode Laser
2W: 1064nm Infrared Laser
6mm(10W Diode Laser)
dash
4000mm/s
115*115mm rounded rectangle
4.53*4.53inches
Expandable to 400*115mm(15.75*4.53inches) with accessories
20W fiber & diode laser engraver, the ultimate production solution
Fiber & diode dual laser supports almost all materials
20W Fiber supports deep engraving, embossing, and thin metal cutting
Smart Camera with Auto Streamline Production™
220mm*220mm the largest desktop fiber engraves large HD photo
10000mm/s speed with multiple safety features
Black laser marking spray is applied to the surface of the material and then combined with the xTool machine, which creates a unique black pattern with high contrast and durability. It can be applied to a wide variety of materials such as most metals (stainless steel, copper, aluminum), glass, ceramics, and even clear acrylic. Please note that the spray is initially white in color, but will turn black after laser engraving.
Compatible withCO2 (25-watt minimum), Diode (10-watt minimum), and Fiber (10-watt) lasers. Easy and quick to use, just simply spray and engrave to create black marks.
Shake the bottle for 2-5 minutes before use for best results. The best spraying distance is 6-8 inches. After spraying, dry at room temperature for 10-30 minutes, or use a heat gun to speed up drying. The spray should be completely dry before engraving with the xTool machines. Remove any remaining marking spray with water and a rag after engraving.
Please note that if you don't use it all at once, be sure to clean the valve by turning the can upside down and pressing the nozzle until only gas comes out after use. The next time you use it, it will not be clogged to avoid the situation of not being able to spray.
xTool Selected materials are terrific partners of xTool laser machines. It is recommended that you open the package within one week of receiving the goods. If you find any quality problems with the materials, please contact us, xTool Selected will provide you with a 30-day unconditional return and exchange service.